PIPERLENE RESIN
PIPERLENE RESIN
- Detail
- Parameters
PIPERLENE RESIN
It is a thermoplastic resin obtained by pretreatment, polymerization, separation and granulation of piperylene in C5 distillate, which is a by-product of oil cracking. This product is mainly suitable for hot melt adhesive, hot melt pressure sensitive adhesive and solvent-based pres-sure-sensitive adhesive, paint, rubber, printing ink industry,adhesives industry, paper glue, adhesive, traffic paint plastic modifier, etc.
Technical requirements and test methods of L-1000 should meet following the table
Item | L-1000 Quality Index | Test Method | |
Premium grade | Qualified product | ||
Softening point | 96-104 | 92-108 | ASTM E28 |
Chrominance | ≤5 | Actual Measurement | GB/T 22295 |
Melt viscosity （200℃） | ≤250 | Actual Measurement | SH/T 0739 ASTM 3236 |
Flow property （mm） | Actual Measurement | Actual Measurement | Q/DTL JS 03.05 |
Appearance | Granular or flaky | Granular or flaky | Visual Inspection |
Technical requirements and test methods of L-1201 should meet following the table
Item | L-1201 Quality Index | Test Method | |
Premium grade | Qualified product | ||
Softening point | 92-104 | 88-108 | ASTM E28 |
Chrominance | ≤5 | Actual Measurement | GB/T 22295 |
Melt viscosity （200℃） | ≤250 | Actual Measurement | SH/T 0739 ASTM 3236 |
Molecular weight | 2500≤Mz | Actual Measurement | Q/DTL JS 03.11 |
Appearance | Granular or flaky | Granular or flaky | Visual Inspection |
Technical requirements and test methods of L-1301 should meet following the table
Item | L-1301 Quality Index | Test Method | |
Premium grade | Qualified product | ||
Softening point | 90-102 | 88-106 | ASTM E28 |
Chrominance | ≤5 | Actual Measurement | GB/T 22295 |
Melt viscosity （200℃） | ≤250 | Actual Measurement | SH/T 0739 ASTM 3236 |
Molecular weight | 2500≤Mz | Actual Measurement | Q/DTL JS 03.11 |
Appearance | Granular or flaky | Granular or flaky | Visual Inspection |
